Positioning system with 100 W power output
The positioning system PSE 34_-14 is an intelligent, compact solution for the automatic adjustment of auxiliary and positioning axes comprising an EC-motor, gear, controller, measuring system and various interfaces. The integrated electronic control feature frees up the machine´s central control unit. No external motors, proximity or limit switches are required. The absolute measuring system at 250 rotations eliminates the need for time-consuming reference runs and increases the efficiency of the machine. Direct measurement of the position at the output shaft ensures highly accurate positioning. The galvanically separated supply voltages for the control and performance electronics permit the implementation of an emergency shut-off function without interrupting communication with the control module.
Address and baud rate switches simplify start-up, even without the knowledge of the control software. The instruments can be mounted on a spindle using the hollow shaft without the need for an additional coupling. A lock brake (optional) holds the position even with no supply voltage. Two bus connections (optional) are available for looping the bus signal. Set-up mode or manual positioning permits the connection of jog keys (optional).
Nominal torque / Nominal rated speed
PSE 3410-14: 10 Nm / 80 rpm
PSE 3418-14: 18 Nm / 60 rpm
CANopen, PROFIBUS DP, Sercos, EtherCAT, PROFINET, EtherNet/IP, POWERLINK, IO-Link
(absolute measurement of position taken directly at the output shaft)
14 mm hollow shaft with clamp and feather key
250 rotations, not subject to mechanical limits
24 VDC ± 10 %
galvanically seperated between control and motor and bus