General Specifications:
Technical Details:
| Temperature range |
0 to 1000 °C |
| Temperature output |
Voltage: 0–5 V DC or 0–10 V DC output,
Linear with measured temperature, rescalable
|
| Alarm output |
Open collector alarm output with temperature threshold and hysteresis, configurable
Note: Alarm and temperature outputs may be used simultaneously
|
| Field of view |
15:1 (see Field of View Diagram) |
| Accuracy |
±1.5% of reading or ±1.5 °C, whichever is greater |
| Repeatability |
±0.5% of reading or ±0.5 °C, whichever is greater |
| Response time |
125 ms (90% response) |
| Configuration |
Via built-in display and controls |
| Emissivity setting |
Adjustable 0.2 to 1.0 |
| Max. temperature span (voltage output) |
1000 °C |
| Min. temperature span (voltage output) |
100 °C |
| Spectral range |
8–14 μm |
| Max. supply voltage |
28 V DC |
| Min. supply voltage (at sensor) |
12 V DC (for 10 V output)
6 V DC (for 5 V output)
|
| Max. current draw |
10 mA |
Mechanical Specifications:
| Specification |
Value |
| Construction |
Stainless Steel |
| Dimensions |
18 mm diameter x 103 mm long |
| Thread Mounting |
M16 x 1 mm pitch |
| Cable Length |
1m (longer lengths available to order) |
| Weight with Cable |
95 g |
Environmental Specifications:
| Specification |
Value |
| Environmental Rating |
IP65 |
| Ambient Temperature Range |
0°C to 90°C |
| Relative Humidity |
95% max. non-condensing |
Electromagnetic Compatibility Standards:
| Specification |
Value |
| Standards |
EN61326-1, EN61326-2-3 |
| (Electrical Equipment for Measurement, Control and Laboratory Use – EMC Requirements – Industrial) |
Field of View Diagrams
The diagram shows the measured spot size for 90% of the detected energy. Sensors can measure longer distances than the diagram shows, and the accuracy is not affected by the measurement distance in clean air. This is because the PyroNFC detects only the wavelengths of infrared radiation that are not absorbed by the atmosphere.
; ?>){kind=logo}
