DOUBLE CHANNEL ANALYZERS SERIES 46

      Categories Liquid & Gas Analysis, pH Transmitter & Controller

      • Graphic display and keypad 128 x 128 pixel monochrome display with graphic icons to show digital output status, washing cycle and alarms with three-colour backlight. Simultaneous flashing values for the measurement (numeric + paragraph) and temperature readings.
      • Five control keys for instrument calibration and configuration
      • Data Logger with 260,000 records downloadable by accessing the internal web server with Wi-Fi connection
      • Enclosure Box
        • Wall mounting ABS plastic material IP65 full box (144x144x122)
        • Panel mounting ABS IP65 front panel only (96x96x42)
      • All outputs Relay, SSR and Output mA are configurable with primary and secondary measure
      Get Quote
      • Description
      • Attachment

        MEASURES

      • pH / ORP (redox)
      • Conductivity
      • Chlorine
      • Chlorine dioxide
      • Ozone
      • Hydrogen peroxide
      • Peracetic acid
      • Chlorites Bromine
      • Dissolved oxygen
      • Turbidity
      • Suspended solids

      TECHNICAL DATA

      Measure Ranges pH: 0.00 – 14.00
      ORP: -2000mV – 2000mV

      Conductivity:
      with C 0.01 cm⁻¹ / K100 sensor: 0.005µS/cm to 200µS/cm
      with C 0.10 cm⁻¹ / K10 sensor: 0.05µS/cm to 2mS/cm
      with C 0.20 cm⁻¹ / K5 sensor: 0.1µS/cm to 4mS/cm
      with C 1.00 cm⁻¹ / K1 sensor: 0.5µS/cm to 20mS/cm
      with C 10.0 cm⁻¹ / K0.1 sensor: 5µS/cm to 200mS/cm
      with C 20.0 cm⁻¹ / K0.5 sensor: 10µS/cm to 400mS/cm

      Input mA: Depending by the type of sensor
      Sensor power supply 4/20mA 2 or 4 wires (*) 18Vdc ±5%, max 30mA
      Measure Accuracy pH: ±0.01 pH
      ORP: ±1 mV
      Conductivity: ±2% on the measuring point
      Input mA: ±0.2%
      Temperature Input Pt100 / Pt1000 Automatic Recognition
      Display Graphic TFT colour LCD
      Resolution 128 × 128 pixels or 240 × 128 pixels
      Languages Italian, English, French, German, Spanish
      Keypad 5 bubble-keys
      Data Logger 260000 records, minimum interval 1 min, data download via Wi-Fi
      Analogue outputs Two (2) programmable: 4…20 mA
      Galvanic separation
      Maximum load 800 Ohm
      NAMUR: OFF 3.6 mA, 22 mA
      Digital Outputs Four (4): Two set points and two alarms
      Set point (2) Set points: RL1 and RL2 2-SPST mechanical 250 VAC / 5A, 30 VDC / 3A
      RL1 and RL2 relay configurable Load activation
      RL3 and RL4 relay configurable Load activation, Probe washing, Alarm repetition
      Setting Cycle time and Delay time
      Frequency output Two (2) SSR1-SSR2 SPST 60 VAC max 100 mA
      Bidirectional, NPN, PNP
      Resistance in ON state 5 ohm @100mA
      Frequency range 0 to 400 pulses/min
      Pulse Duration 100 ms
      Digital Input REED digital input for dry contact 5 VDC, max 6 mA
      Communication port RS485 modbus server ASCII / RTU standard protocol
      Output 24Vdc 24Vdc ±5% max 250mA
      Operating conditions Operating temperature: -10 – 50°C
      Storage: -25 – 65°C
      Humidity: 10-95% (non-condensing)
      Power supply / Electrical protections Universal power supply 100-240 Vac 50/60 Hz
      Low voltage power supply 24-48 Vdc or 24 Vac CE compliant
      Transformer isolation 4KV
      Absorbing average 3.6A
      Electrical Protection: EMI / RFI CEI-EN55011 – 05/99
      According to UL, not connect to relay outputs exceeding 115V
      Mechanical protections Wall mounting: IP65
      Panel mounting: IP65 Front, IP20 Back

      Data sheet

      Download
      Copyright © 2026 Parshvi Technology (India) Private Limited. All Rights Reserved.