Categories Liquid & Gas Analysis, Free Chlorine Analyzer
| Parameter | Free chlorine (organic and inorganic), Total chlorine, Chlorine dioxide Chlorites, Ozone, Hydrogen peroxide, Peracetic acid, Bromine |
|---|---|
| Measuring range | 0.2, 5, 10, 20, 200, 2000 ppm – see specific sensor data sheet |
| Application range | Drinking water, industrial and process water, waste water. Surfactants are partially tolerated. |
| Interferents | See specific sensor data sheet |
| pH range | 4 … 10 – see specific sensor data sheet |
| Conductivity range | 100 – 63000 µS/cm |
| Flow rate | 30 … 60 l/h |
| Pressure | 0 … 3 bar – no pressure impulses and/or vibrations |
| Temperature range | 0 … 45°C (others on request up to 70°C) |
| Temperature compensation | Automatic |
| Calibration | Photometric reference method DPD1. Recommended once a week and whenever the working conditions (concentration, temperature or pressure) and/or the gel solution, and/or the membrane are changed. |
| Materials | PVC, PEEK, AISI 316, microporous membrane |
| IP Rating | IP65 |
| Electrolyte solution | Replace every 3–6 months in reference to the quality of the water sample analyzed. |
| Membrane cap | Replace every 6–12 months in reference to the quality of the water sample analyzed. |
; ?>){kind=logo}