Display panel PUC 44

Display panel PUC 44


Special features

  • a) for high-end cleanroom applications (PUC 44 – 3)
    b) for standard cleanroom applications (PUC 44 – 2)
    c) for control cabinet installation (PUC 44 – 1)
  • Values, curves, bar graph, vector can be displayed
  • Display of up to four values (any phys. / chem. values) in one display, free designation of the channels
  • Differential pressure transmitter can be connected external
  • 4 individual alarms LowLow/Low/High/HighHigh for any input can be defined. Signalling takes place as a text and optionally with colour change. The individual alarms are retained while the triggering criterion for the alarm is pending.
  • A collective alarm (of previously defined individual alarms) triggers the acoustic signal. The acoustic alarm is switched off by touching the screen.
  • The user only has the right to change the released views and to switch off the collective alarm. The user needs no password for this.
  • The configuration takes place in multiple languages, menu-controlled and via touch operation (without parameterisation software). It can be performed in the factory or by the commissioner.
  • A one-level password system with at least 6 digits according to GAMP 5 permits access to the configuration by the commissioner or the process officer.
  • Recording of data is not intended (no logging function). This facilitates validation.
  • The respective current values of the inputs and the condition of the alarms are available via Modbus RTU at all times and BACnet MS/TP


Up to 4 external analogue values of any phys. / chem. values

Margin of error
depending on the connected measuring transmitters

Available views (adjustable)
Values, bar graph, curve chart, vector diagram

Power supply
24 VDC, ± 5 %

Protection class
PUC 44-2/-3:
IP 65 (front side)
IP 20 (housing and terminals)
PUC 44-1:
IP 20

Data Interface
Modbus RTU

Display panel PUC 44

Parshvi Technology