Description
| Communication: | RS-485 Modbus (RTU) |
| Accuracy (from applied pressure): (model 2500) | Pressure < 125 Pa = 1 % + ±2 Pa Pressure > 125 Pa = 1 % + ±1 Pa |
| Accuracy (from applied pressure): (model 7000) | Pressure < 125 Pa = 1.5 % + ±2 Pa Pressure > 125 Pa = 1.5 % + ±1 Pa |
| Zero point calibration: | automatic with autozero element (-AZ), by pushbutton or via Modbus |
| Measuring units: | Pressure: Pa, kPa, mbar, inchWC, mmWC, psi Flow: m3/s, m3/hr, cfm, l/s, m/s, ft/min |
| Measuring element: | MEMS, no flow-through |
| Supply voltage: | 24 VAC ±10 % / 24 VDC ±10 % |
| Power consumption: | < 1.0 W |
| Output signal: | via Modbus |
| Response time: | 1.0−20 s, selectable via menu or via Modbus |
| Operating temperature: | -20…+50 °C (with autozero calibration -5…+50 °C) |
| Protection standard: | IP54 |
DPT MOD :
