Positioning system with 25 W or 35 W power output
The PSE 30_/32_-14 positioning systems are intelligent, compact solutions for the automatic adjustment of auxiliary and positioning axes comprising an EC-motor, gear, controller, measuring system and CANopen, PROFIBUS DP or Ethernet-bus interface. The integrated electronic control feature frees up the machine´s central control unit. No external motors, proximity or limit switches are required.
The absolute measuring system at 250 rotations eliminates the need for time-consuming reference runs and increases the efficiency of the machine. Direct measurement of the position at the output shaft ensures highly accurate positioning. The galvanically separated supply voltages for the control and performance electronics permit the implementation of an emergency shut-off function without interrupting communication with the control module.
Address and baud rate switches simplify start-up, even without the knowledge of the control software (not for IO-Link). The instruments can be mounted on a spindle using the hollow shaft without the need for an additional coupling. A holding brake (optional) holds the position even with no supply voltage.
Two bus connections are available for looping the bus signal (not for IO-Link). Set-up mode or manual positioning permits the connection of jog keys (optional, not for IO-Link).
Nominal torque / nominal rate speed
PSE 301-14: 1 Nm / 210 rpm
PSE 302-14: 2 Nm / 100 rpm
PSE 305-14: 5 Nm / 40 rpm
PSE 322-14: 2 Nm / 150 rpm
PSE 325-14: 5 Nm / 68 rpm
PSE 3210-14: 10 Nm / 30 rpm
PSE 3218-14: 18 Nm / 17 rpm
CANopen, PROFIBUS DP, DeviceNet, Modbus RTU,
Sercos, EtherCAT, PROFINET, EtherNet/IP, POWERLINK, IO-Link
14 mm hollow shaft with adjustable collar
250 rotations, not subject to mechanical limits