Description
Positioning system with 25 W or 35 W power output
The positioning systems PSE 31_/33_-14 are intelligent, compact solutions for the automatic adjustment of auxiliary and positioning axes comprising an EC-motor, gear, controller, measuring system and CANopen, PROFIBUS DP or Ethernet-bus interface. The integrated electronic control feature frees up the machine´s central control unit. No external motors, proximity or limit switches are required. The absolute measuring system at 250 rotations eliminates the need for time-consuming reference runs and increases the efficiency of the machine. Direct measurement of the position at the output shaft ensures highly accurate positioning. The galvanically separated supply voltages for the control and performance electronics permit the implementation of an emergency shut-off function without interrupting communication with the control module.
Address and baud rate switches simplify start-up, even without the knowledge of the control software (not for IO-Link). The instruments can be mounted on a spindle using the hollow shaft without the need for an additional coupling. Two bus connections are available for looping the bus signal (not for IO-Link).
A holding brake (optional) holds the position even with no supply voltage. Set-up mode or manual positioning permits the connection of jog keys (optional, not for IO-Link).
Design
Longitudinal construction
Nominal torque / Nominal rated speed
PSE 311-14: 1 Nm / 210 rpm
PSE 312-14: 2 Nm / 115 rpm
PSE 332-14: 2 Nm / 150 rpm
PSE 335-14: 5 Nm / 68 rpm
PSE 3310-14: 10 Nm / 25 rpm
PSE 3325-14: 25 Nm / 10 rpm
Data interface
CANopen, PROFIBUS DP, DeviceNet, Modbus RTU,
Sercos, EtherCAT, PROFINET, EtherNet/IP, POWERLINK, IO-Link
Positioning accuracy
0.9°
Output shaft
14 mm hollow shaft with adjustable collar
Positioning range
250 rotations, not subject to mechanical limits
Supply voltage
24 VDC
Protection class
IP 54