PyroCAN – Pyrometer with digital CAN interface

PyroCAN – Pyrometer with digital CAN interface

Sensor Features

  • Non-contact infrared temperature sensor with CAN Bus interface
  • Temperature range: -20°C to 1000°C
  • Raw CAN protocol
  • Configurable CAN ID and adjustable emissivity setting
  • Not designed or approved for fever detection


General Specifications:

Temperature Range-20°C to 1000°C
InterfaceRaw CAN
Accuracy±1% of reading or ±1°C, whichever is greater
Repeatability±0.5% of reading or ±0.5°C, whichever is greater
Emissivity SettingAdjustable via CAN, 0.2 to 1.0
Response Time, t90200 ms (90% response)
Spectral Range8 to 14 μm
Supply Voltage12 to 24 V DC
Supply Current50 mA max.

CAN Protocol Specifications:

Baud Rate250 kbps
Data Format8 bytes total:
– Bytes 1-4: Object temperature as floating point
– Bytes 5-8: Ambient temperature as floating point
Transmit Interval200 ms
CAN ID Range– ID can be set between 0 and 255 as a 4-byte unsigned integer
Emissivity– Adjustable from 0.2 to 1.0 as a 4-byte floating point

Mechanical Specifications:

ConstructionStainless Steel
Dimensions18 mm diameter x 103 mm long
Thread MountingM16 x 1 mm pitch
Cable Length1m (longer lengths available to order)
Weight with Cable95 g

Environmental Specifications:

Environmental RatingIP65
Ambient Temperature Range0°C to 90°C
Relative Humidity95% max. non-condensing

Field of View Diagrams

Please note: The given measured spot size contains 90% of the energy detected by the sensor. We normally recommend the target is at least twice as large as the given measured spot for maximum accuracy. Sensors may be used at longer distances than the above diagrams show. There is no maximum measurement distance in clean air; this is because the PyroCAN detects only the wavelengths of infrared radiation that are not absorbed by the atmosphere.




Parshvi Technology