Description
Attribute | Value |
---|---|
Temperature Range | -20°C to 1000°C |
Interface | RS-485 Modbus RTU |
Accuracy | ±1% of reading or ±1°C, whichever is greater |
Repeatability | ±0.5% of reading or ±0.5°C, whichever is greater |
Emissivity | 0.2 to 1.0 |
Response Time, t90 | 125 ms (90% response) |
Spectral Range | 8 to 14 μm |
Supply Voltage | 6 to 28 V DC |
Supply Current | 50 mA max. |
Baud Rate | 9600 baud (other configurations available upon request) |
Modbus Data Format | 8 data bits, no parity, 1 stop bit (other configurations available upon request) |
Configuration:
Attribute | Value |
---|---|
Configuration Method | – Via PM180 touch screen, or directly via RS-485 Modbus |
Configurable Parameters | – Emissivity Setting |
– Averaging | |
– Peak/Valley Hold Processing | |
– Reflected Energy Compensation |
Mechanical Specifications:
Attribute | Value |
---|---|
Construction | Stainless Steel |
Dimensions | 18 mm diameter x 45 mm long (excluding cable gland) |
Thread Mounting | M16 x 1 mm pitch |
Cable Length | 1m (longer lengths available to order) |
Weight with Cable | 85 g |
Environmental Specifications:
Attribute | Value |
---|---|
Environmental Rating | IP65 |
Ambient Temperature Range | – PyroMiniBus sensor: 0°C to 120°C including cable |
– PMBHUB junction box: 0°C to 80°C | |
Relative Humidity | 95% max. non-condensing |
Please note: The given measured spot size contains 90% of the energy detected by the sensor. We normally recommend the target is at least twice as large as the given measured spot for maximum accuracy. Sensors may be used at longer distances than the above diagrams show. There is no maximum measurement distance in clean air; this is because the PyroMiniBus detects only the wavelengths of infrared radiation that are not absorbed by the atmosphere.