Description
General Specifications:
| Attribute | Value |
|---|---|
| Temperature Range | 0 to 1000°C |
| Temperature Output | – Choice of 2 options (see Ordering Information): |
| – Voltage: 0-5 V DC or 0-10 V DC output, linear with measured temperature, rescalable, configurable via NFC | |
| – Type K Thermocouple output | |
| Alarm Output | – Open collector alarm output with temperature threshold and hysteresis, configurable via NFC |
| – Note: Alarm and temperature outputs may be used simultaneously | |
| Field of View | 15:1 (see Field of View Diagram) |
| Accuracy | ± 1.5% of reading or ± 1.5°C, whichever is greater |
| Repeatability | ± 0.5% of reading or ± 0.5°C, whichever is greater |
| Response Time | 125 ms (90% response) |
| Configuration | – Via app (Android or iOS) using NFC-equipped device (e.g., smartphone or tablet) |
| Emissivity | – Adjustable via app |
| Emissivity Setting Range | 0.2 to 1.0 |
| Max Temperature Span (Voltage Output) | 1000°C |
| Min Temperature Span (Voltage Output) | 100°C |
| Spectral Range | 8-14 μm |
| Max. Supply Voltage | 28 V DC |
| Min. Supply Voltage (at Sensor) | – 12 V DC (for 10 V output) |
| – 6 V DC (for 5 V output) | |
| Max Current Draw | 10 mA |
App Specifications:
| Attribute | Value |
|---|---|
| System Requirements (Apple) | – iOS 13 onwards |
| – iPhone 7 onwards | |
| System Requirements (Android) | – Android 4.1 onwards |
| – Devices with NFC (to check if your phone has NFC, visit www.nfcworld.com/nfc-phones-list) | |
| Configurable Parameters | – Temperature range (models with voltage output only) |
| – Linear voltage output type and scale (models with voltage output only) | |
| – Alarm output threshold and hysteresis | |
| – Emissivity setting | |
| – Reflected temperature | |
| Temperature Units | °C / °F |
| Signal Processing | – Averaging Period (0.125 to 60 seconds) |
| – Peak / Valley Hold | |
| – Hold Period (0.125 to 120 seconds) | |
| Temperature Reading | – Hold NFC device against sensor for continuous in-app temperature updates (Android) |
| – Tap temperature and hold phone against sensor to take a single temperature reading (iOS) |
Mechanical Specifications:
| Attribute | Value |
|---|---|
| Construction | Black anodized aluminum and ABS |
| Cable Length | 1 meter standard (longer lengths available to order) |
| Weight with 1 Meter Cable | – 65 g (models with voltage output) |
| – 100 g (models with thermocouple output) |
Environmental Specifications:
| Attribute | Value |
|---|---|
| Environmental Rating | IP65 |
| Ambient Temperature Range | 0°C to 80°C |
| Relative Humidity | 95% max. non-condensing |
Field of View Diagram
The diagram shows the measured spot size for 90% of the detected energy. Sensors can measure longer distances than the diagram shows, and the accuracy is not affected by the measurement distance in clean air. This is because the PyroNFC detects only the wavelengths of infrared radiation that are not absorbed by the atmosphere.
